Optional Idsdm Module; Removing The Idsdm Module; Installing The Idsdm Module - Dell 2WMYN Installation And Service Manual

Optional IDSDM module

Removing the IDSDM module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If you are replacing the IDSDM card,
NOTE: Temporarily label each SD card with its corresponding slot number before removal. Reinstall the SD cards into
the corresponding slots.
Steps
Holding the blue pull tab, lift the IDSDM card out of the system.
Figure 72. Removing the IDSDM module
Next steps
Replace the IDSDM module.

Installing the IDSDM module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
1. Locate the IDSDM connector on the system board.
To locate IDSDM, see the
2. Align IDSDM module with the connector on the system board.
Safety instructions.
Before working inside your
remove the MicroSD
Safety instructions.
Before working inside your
System board jumpers and connectors section.
system.
cards.
system.
Installing and removing system components 81