Canon PowerShot SD780 IS DIGITAL ELPH User Manual page 122

You can cut out a portion of a recorded image and save it as a new image file.
Select [Trimming].
Press the
MENU
button, select the
[E
tab
and [Trimming], then press the
@
button.
Select an image.
Press the
~ ~
buttons to select the image
and press the
@
button.
Adjust the trimming area.
A green frame will appear around the
portion of the image to be trimmed.
The original image will display in the upper
left and the trimmed image will display in
the lower right.
If you move the zoom lever to the left or
right, you can change the frame size.
If you press the ..
T
~
..
buttons, you can
move the frame.
If you press the
DISP.
button, you can
change the vertical/horizontal orientation
of the frame.
In an image with a detected face, a gray
frame will appear around faces located in
the upper left of the frame, and the frame
can be used for trimming. You can switch
between frames
by press\ng the
@
button.
Press the
MENU
button.
Save as a new image and display.
Perform Steps 4 and 5 on p. 121.
- l!m,S· ~ndXS
images cannot be trimmed.
-Trimm.iQ9.
is
ai1;iYPOSSibl~.f9r.irpageS s~ot.
at
ClspectratiQ4.:~.(verti~I~:4)
.
•• • •
· !ne~urnbyrpf .recordedRj~~lsin?.trimmed
·im(lge'Aiillbesma.tler than . • . •
beforetrirnmihg~
• . · .
( -
-.-. . . - . . - . . . . . - .----J-----.--.-----
Trimming Area Display
122