SilverStone RM61-312 User Manual

RM600 & RM61-312
User manual
www.silverstonetek.com
Accessories Content
Motherboard Motherboard / PSU Screw
Standoff 5.25" Device Screw
5.25" Guide Rail 5.25" Ventilation 5.25" Bezel
Screws Bezel
5.25" Guide Rail x9 Key Case Feet
Vertical position 2U Redundant Fan Extension
accessories accessories Cable
RM61-312 RM61-312
3.5" HDD 2.5" SSD
Installation Steps
1.Press down on the front panel switch to remove the front panel
4. Install the 3.5" HDD in a similar manner. The 3.5" HDD can be
inserted into the hard drive cage in either direction
RM600
2. Remove both top and bottom panels
5.External 2.5"/3.5" drive installation
1. Pull the tray out of the chassis
2. Install the drive into the drive tray, secure it with screws, and then
re-insert the assembled drive tray module back into the chassis
RM61-312
3. Remove the 2.5" SSD tray, and gently flex the tray to facilitate the
installation of the 2.5" SSD
6. To facilitate a simple connection of the hard drive backplane
cables, remove the fan bracket by loosening the screws that
secure the backplane to the chassis
RM61-312
1