SilverStone RM44 User Manual

Download this manual

1. Remove 4 screws from expansion card retainer

User manual

www.silverstonetek.com

5. Install 2.5" drives on 2.5" trays.

4. Removing expansion card clip buckle

Pull up

2. Expansion card retainer position shift (It is recommended to avoid the position

of the expansion card connectors, and make sure the length of the PSU will not

interfere.)

1. Height limitation with expansion card clip buckle installed

Graphics Card

5. Adjust the position of the expansion card retainer according to the required

height of the interface card, then tighten the screw

Press and push

3. Install 2 x 3.5" HDD on the expansion card retainer

2. Height limitation with expansion card clip buckle removed

113mm

Graphics Card

1. Install Nvidia 30 series graphics cards

tighten

loosen

4. Install 3 x 2.5" SSD on the expansion card retainer

3. Height limitation with expansion card retainer removed

139mm

Graphics Card

2. Install Nvidia 30 series graphics cards bracket (slightly tighten the screws, and

reserve space for the bracket to slide left and right)

154mm

Need help?

Do you have a question about the RM44 and is the answer not in the manual?

Page 1 1. Remove 4 screws from expansion card retainer 2. Expansion card retainer position shift (It is recommended to avoid the position 3. Install 2 x 3.5" HDD on the expansion card retainer 4. Install 3 x 2.5" SSD on the expansion card retainer of the expansion card connectors, and make sure the length of the PSU will not interfere.) User manual...
Page 2 Warranty terms & conditions back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users”...