Remove The Sensor Board (With Cable) - Lenovo ThinkBook 13s Gen 4 Hardware Maintenance Manual

Figure 44. Remove the camera board
Go to https://support.lenovo.com/partslookup
replacement parts:
Camera board
Removable tape

Remove the sensor board (with cable)

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 45
"Remove the hinge cover" on page 47
"Remove the LCD bezel" on page 47
"Remove the LCD panel" on page 49
Step 1. Disconnect the camera cable from the sensor board and then remove the sensor board (with
cable).
Figure 45. Remove the sensor board (with cable)
Go to https://support.lenovo.com/partslookup
replacement parts:
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
53