Remove the touchpad
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the battery pack" on page 29
Step 1.
Peel back the tape and then peel off the three pieces of tape.
Figure 13. Peel off the pieces of tape
Step 2.
Disconnect the touchpad cable from the touchpad and then remove four screws.
Figure 14. Disconnect the touchpad cable and remove four screws
Screw specifications
M2 x L2
Step 3.
Remove the touchpad.
34
Hardware Maintenance Manual
Number of screws
4