Remove The Fingerprint Board Module - Lenovo ThinkBook 13s Gen 4 Hardware Maintenance Manual

Screw specifications
M2 x L4
M2 x L2
Go to
https://support.lenovo.com/partslookup
part:
I/O board

Remove the fingerprint board module

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the I/O board" on page 37
Step 1. Peel off the two pieces of tape.
Figure 26. Peel off the two pieces of tape
Step 2. Peel off the tape and then remove the fingerprint board module.
Figure 27. Remove the fingerprint board module
Number of screws
2
1
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
41