1
1. Screw
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb holder,
and then remove the burnt-out
PERIODIC MAINTENANCE AND ADJUSTMENT
bulb.
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the bulb cover, and then
1
connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
2
headlight beam if necessary.
Replacing the tail/brake light
bulb
1
1. Tail/brake light lens
2. Screw
8-12
1. Remove the tail/brake light lens by
removing the screws.
1
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU24133
2
3
4
5
2
6
7
8
9