Instrument And Control Functions; Beeper; Main Switch/Steering Lock - Yamaha EC-03 2012 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Beeper

The EC-03 informs you of the following
operations and status of the vehicle us-
1
ing the beeper.

Key in "ON" position
2

Standby mode (See page 7-2.)

A control button is pushed
3 
Security lock unlocked

Security lock unlock failed

Enters the riding mode (see page
4
4-6).

Turn signals in use
5

Battery level is approx. 10% (See
page 3-4.)

6
Battery charging started
7
8
9
EAU49983

Main switch/steering lock

ON
OFF
LOCK
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
ON
All electrical systems are supplied with
power, and the headlight, meter lighting
and taillight come on. The key cannot
be removed.
TIP
To protect the battery, the EC-03 is
equipped with an auto-off function. The
power stops automatically if the vehicle
is stopped for more than five minutes.
To cancel the auto-off function, turn the
EAU10461 key to "OFF" and then back to "ON"
again.
OFF
All electrical systems are off. The key
can be removed.
Never turn the key to "OFF" or
"LOCK" while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
LOCK
EAU50000
The steering is locked, and all electrical
systems are off. The key can be re-
moved.
4-1
WARNING
EAU10661
EWA10061
EAU10684