Installing The Power-Button Assembly - Dell MF6F1 Service Manual

2. Remove the base cover.
3. Remove the 2230 solid-state
4. Remove the 2280 solid-state
5. Remove the rear I/O-cover.
6. Remove the battery.
7. Remove the left I/O-board.
8. Remove the right I/O-board.
9. Remove the system board.
About this task
The following image indicates the location of the power-button assembly and provides a visual representation of the removal
procedure.
Steps
1. Remove the three (M2x1.9) screws that secure the power-button bracket to the palm-rest assembly.
2. Lift the power-button bracket off the power-button assembly.
3. Peel the power-button assembly and its cable off the palm-rest assembly.

Installing the power-button assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power-button assembly and provides a visual representation of the installation
procedure.
52
drive. (if applicable)
drive. (if applicable)