Battery; Removing The Battery - Dell MF6F1 Service Manual

11. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
12. Place the wireless card bracket on the wireless card.
13. Replace the screw (M2x3) that secures the wireless card bracket to the left I/O-board.
14. Adhere the Mylar over the system board.
Next steps
1. Install the rear I/O-cover.
2. Install the base cover.
3. Follow the procedure in

Battery

Removing the battery

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 2230 solid-state
4. Remove the 2280 solid-state
About this task
The following image indicates the location of the battery and provides a visual representation of the removal procedure.
26
After working inside your
Before working inside your
drive. (if applicable)
drive. (if applicable)
Antenna-cable color
White
Black
computer.
computer.