Advertisement
IMPORTANT
The
lightning
flash
with
arrowhead,
within
an
equilateral triangle, is intended to alert the user of the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.
READ INSTRUCTIONS
— All the safety and operating
instructions should be read before the appliance
is operated.
RETAIN INSTRUCTIONS — The operating instructions
should be retained for future reference.
HEED WARNING
— All warnings on the appliance and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS -- All operating and use in-
structions should be followed.
WATER AND MOISTURE
— The appliance should not
be used near water — for example, near a bathtub,
washbowl,
kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
LOCATION — The appliance should be installed in a
stable location.
WALL
OR
CEILING
MOUNTING
—
The
appliance
should not be mounted to a wall or ceiling.
VENTILATION — The appliance should be situated so
that its location or position does not interfere with
its proper ventilation, For example, the appliance
should not be situated on a bed, sofa, rug, or simi-
lar surface that may block the ventilation open-
ings: or, placed in a built-in installation, such as
a bookcase or cabinet that may impede the flow
_
of air through the ventilation openings.
HEAT — The appliance should be situated away from
heat sources
such
as radiators,
heat registers,
stoves, or other appliances {including amplifiers)
that produce heat.
POWER SOURCES
— The appliance should be con-
nected
to
a. power
supply
only
of the
type
described
in the operating
instructions or as
marked on the appliance.
POWER-CORD PROTECTION — Power-supply cords
should be routed so that they. are not likely to be
walked
on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the appliance.
POLARIZATION
— If your purchased product is provid-
ed with a polarized power plug, please read the fol-
lowing instructions. This product is equipped with
a polarized alternating current line plug {a plug hav-
ing one blade wider than the other). This plug will
fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
CLEANING
— The appliance should be cleaned only
with a polishing cloth or a soft dry cloth, Never
clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the
cabinet.
[For Canadian model]
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS
INSIDE. REFER SERVICING
TO QUALIFIED
SERVICE PERSONNEL.
SAFETY INSTRUCTIONS
POWER
LINES
—
An
outdoor
antenna
should
be
located away from power lines.
NONUSE PERIODS — The power cord of the appliance
should be unplugged from the outlet when left
unused for 2 long period of time.
OBJECT AND LIQUID ENTRY — Care should be taken
so that objects do not fall and liquids are not spilled
into the enclosure through openings.
DAMAGE
REQUIRING
SERVICE
—
The appliance
should be serviced by a Pioneer authorized service
center or qualified service personnel when:
The
power-supply
cord or the plug has
been
damaged; or
Objects have fallen, or liquid has been spilled into
the appliance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally
or exhibits a marked change in performance; or
The appliance has been dropped; or the enclosure
damaged.
SERVICING — The user should not attempt to service
the appliance beyond that described in the oper-
ating instructions. For all other servicing, contact
the nearest Pioneer authorized service center.
POWER LINES
SERVICE
ENTRANCE
CONDUCTORS +
GROUND
SERVICE ENTRANCE
EQUIPMENT
POWER
SERVICE
GROUNDING
ELECTRODE
SYSTEM
(e.g. interior metal water pipe)
FIG.A
BONDING
JUMPER a
UI
4.
GROUND
~—
CLAMPS
The exclamation point within an equilateral triangle is
intended to alert the user of the presence of important
operating and maintenance {servicing) instructions in
the literature accompanying
the appliance.
OUTDOOR ANTENNA GROUNDING
-— If an outside
antenna is connected to the antenna terminal, be
sure the antenna system is grounded so as to pro-
vide some protection against voltage surges and
built up static charges.
In the U.S.A. section 810 of the National Electri-
cal Code, ANSI/NFPA
No. 70-1984,
provides
information with respect to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna dis-
charge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See
Fig. A.
CART — An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and
cart combination to overturn.
a)
Use No.10 AWG (5.3 mm") cop-
per, No.8 AWG (8.4 mm?) alumi-
num,
No.17 AWG
{1.0 mm?)
copper-clad steel, bronze wire, or
larger as ground wire.
b)
Secure
antenna
lead-in
and
ground wires to house with stand-
off insulators spaced from 4 feet
(1.22 meters) to 6 feet (1.83
oy
meters) apart.
RN ates
c)
Mount antenna discharge unit as
WIRE
closely as possible to where lead-
in enters house.
TO EXTERNAL
d)
Use jumper wire not smaller than
NALS OE
No.6 AWG.(13.3 mm*) copper, or
PRODUCT
the equivalent, when a separate
antenna-grounding
electrode
is
ANTENNA
used,
STAND-OFF
INSULATORS b
GROUND
WIRE a,b
OPTIONAL ANTENNA
GROUNDING ELECTRODE
DRIVEN 8 FEET (2.44 m)
INTO THE EARTH
IF REQUIRED BY
LOCAL CODES SEE
NEC SECTION 810-21 {f).
[Pour le modéle Canadien]
2
<ARB1160>
Advertisement
