Advertisement
45
OPERATING PROCEDURE
8. Removing of the
compressor
( 1) Remove
the
top panel
(2) Remove
the
service panel.
(3) Remove the side
panel.
(4)
Remove
the
front
panel.
(5) Disconnect the compressor lead wires from the
clamp.
(6)
Remove th_e
compressor terminal cover.
(7)
Remove
the compressor lead wires and the thermal
overcurrent 51 C
from
the compressor terminals.
(8) Disconnect
the
compressor
discharge
pipe
.
(9) Disconnect the compressor suction pipe.
(10)Remove the compressor.
To remove MC3 comp., remove the separator.
The separator can be removed by removing 6 set screws
.
PHOTOS
Photo 7
Suction pipe
Compressor
Compressor terminal
Photo 8
Separator
Set screws
(for
separator)
Thermal overcurrent
relay
MC3 compressor
I
Discharge
pipe
J
Advertisement
