Auto Set; Pad Gain - Yamaha DTX Owner's Manual

Feature Reference — Drum Kit Trigger Edit Mode

3 Auto Set

This automatically sets the input gain
(sensitivity) of each input jack number.
A The appropriate input gains are preset as a setting
example so that you can start to play without any input
adjustment. However, you are required to adjust the input gain
for each pad either here or in the next PAD gain section for your
own drum settings.
! Move the cursor to the INPUT focus area
and rotate the Data Scroll Wheel or use the
+1/YES and -1/NO buttons to choose the
input jack number.
You can also enable the Learn mode (P.115)
to automatically select the input jack number
by hitting each pad or drum, then select the
input gain.
" Move the cursor to the focus area and press
the +1/YES button. The display will change
to "HIT2ff".
MISC.
CYMBAL
SNARE
KICK
" Slowly beat the pad or drum connected to
the input jack hard (ff=fortissimo) twice.
The first beat changes the display to HIT1 ff
and the second beat changes the display to
"Off" quitting the automatic setting.
# Repeat steps !, ", and # to set the input
gain for each input jack number.
36
INPUT

4 PAD Gain

This manually sets the input gain (sensitivity) of
each input jack number.
! Move the cursor to INPUT and rotate the
Data Scroll Wheel or use the +1/YES and -1/
NO buttons to choose the input jack
number.
You can also enable the Learn mode (P.115)
to automatically select the input jack number
by hitting each pad or drum, then select the
input gain.
" Move the cursor to the gain focus area and
rotate the Data Scroll Wheel or use the +1/
YES and -1/NO buttons to set the Gain. Play
the pad or drum connected to the selected
input jack number hard (ff=fortissimo) and
adjust the Gain level to approximately 90%
of the Input level.
# Repeat steps ! and " and set the input
Gain for each input jack number.
Gain
Input level
MISC.
CYMBAL
SNARE
KICK
B The input gain can be set faster and more efficiently if
you use the Auto Set first to automatically set the levels and
then make fine adjustments here.
Settings:
The following parameters can be set for input numbers
1 to 12.
Gain: 0 to 63.
A The Input level display here is operated differently from
other displays and cannot be set by moving the cursor to the
focus area. Set the Input level by following step 2 above.
INPUT