Delay Page - Yamaha 03DVEK Owner's Manual

23
Display Pages

Delay Page

This section explains the changes to the Delay page shown below. Use the [DELAY/ ] but-
ton to locate this page.
In addition to samples and time, input and output delays can also be specified as frames in
quarter-frame steps, as shown on the page above. With a sampling rate of 48 kHz and the
Frame Type set to DF, the delay range is approximately six frames.
When a bus out is selected, the OFFSET parameter appears on the CH Delay page, as shown
above. This parameters sets the delay for bus outs globally, and can be used to correct the
timing between audio and video. An offset/delay of up to four frames in single frame steps
can be set.
Shown above is the Output Dly monitoring page. Delay values are indicated in frames. The
global OFFSET value for bus outs is also shown.
03D Video Edit Suite Software—Owner's Manual