Ch 1-16 & 17-24/Stin Pages - Yamaha 03DVEK Owner's Manual

21
Display Pages
CH 1-16 & 17-24/Stin Pages
This section explains the parameters on the CH 1-16 and 17-24/Stin pages shown below.
Use the [AUTOMIX] button to locate these pages.
The CH 1-16 and 17-24/Stin pages contain individual channel on/off switches for channel
delay (DLY), dynamics (DYN), EQ, and auto level adjust (A). The rotary controls show the
actual send levels. The value below these controls indicates the level of the channel fader.
When either of these pages are selected, the [SEL] buttons work as Local on/off buttons.
When a [SEL] button's indicator is off, that channel responds to incoming ESAM II com-
mands. When it's flashing, the channel is in Local mode and ignores ESAM II commands.
The ROLL LIB. (library) allows you to store and recall channel information for each machine
(i.e., roll or tape).
Up to 100 memories (0 to 99) are available in the ROLL library (memory 0 is recall-only),
and the following parameters can be stored:
• Channel settings that can be stored in channel library programs
• Crossfade curve settings
• LIMIT LEVEL setting
• Level set using LEVEL ADJUST
• ADJUST on/off
To store channel information, select a MACHINE, select a memory, and then press the
STORE switch. The settings of channels assigned to the selected machine will be stored
(maximum of four channels).
To recall channel information, select a MACHINE, select a memory, and then press the
RECALL switch. If the number of stored channels and the number of recalled channels are
different, the following applies:
• If a memory containing data for four channels is recalled to a machine assigned to two
channels, the data from the first two channels is used.
• If a memory containing data for two channels is recalled to a machine assigned to four
channels, the data from the first two channels is recalled twice.
03D Video Edit Suite Software—Owner's Manual