Configuring Studio Manager - Yamaha 01V96 Installation Manual

Configuring Studio Manager
Note: If you're using Windows, you must specify a MIDI port (see page 20) before making the
following settings.
Selecting Ports
In order to use Studio Manager, you must specify the input and output ports that Studio
Manager should use to communicate with your Yamaha mixing console.
Windows: Choose System Setup from the File menu, and specify the input and output ports
on the Setup dialog box, as shown below.
Macintosh: Choose Select OMS Ports from the File menu, and specify the input and output
ports (device names set in OMS Studio Setup) on the Setup dialog box, as shown below.
Note: Choose OMS MIDI Setup from the File menu, and make sure that the "Run MIDI in
Background" option is on.
OMS Studio Setup can be opened directly from Studio Manager by selecting OMS Studio
Setup from the File menu.
System Setup
To open the Setup window, choose System Setup from the File menu.
This is the Windows Setup window.

Configuring Studio Manager

Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide
21