Table of Contents
Advertisement
Plug the power cord of the system into an AC wall outlet, and
press the POWER
key on the remote control unit to turn the
power on.
When the power is turned on, press the key of the source
component to be operated.
Remote control
light sensor
| AREER ED
Model: RC-R0503
Infrared ray system
Operating range
(approx.)
KR-A5O070/KR-A4070 {En}
Mely u a t n e c s sacra tee case
Perreee re Steet Cette
Peer
eee
eer er errr
etre
errr
terre
errerrerrerr
terete rerrrre seer
rere eeri yy
@ Insert two AA-size {R6 / SUM-3) batteries as indicated by the po-
larity marking.
e@ Components connected via the system control cords, such as the
CD player, can also be remote-controlled. In this case, please read
the instruction manual supplied with your components.
e When two operation keys on the remote control unit are pressed
successively, press each key securely reserving an interval of more
than 1 second for each press.
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-contro!lable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light
sensor. In such a case, change the system installation position to prevent the malfunction.
Advertisement
Table of Contents
