Table of Contents
Advertisement
Flash with Other Modes
When you want to control both
the sync speed and the aper¬
ture, use manual exposure. Set
the desired aperture and shutter
speed. The E-TTL autoflash
control system regulates the
flash output according to the
aperture you set for optimum
flash exposure
Set the camera to M
(Manual)
and
set the
desired aperture and sync
speed anywhere from 30
sec. up to the camera max¬
imum sync speed.
Make sure that the pilot
lamp is lit.
Press the shutter button
halfway to focus on the
subject.
0
Use of the buLb setting for the sync speed is applicable for flash photog¬
raphy with manual exposure.
Check that V is displayed
in the viewfinder. Then,
press the shutter button
completely to take the pic¬
ture.
19
Advertisement
Table of Contents
