Table of Contents
Advertisement
Fully-Automatic Flash Operation
Make sure that the pilot
lamp is lit.
Aim the active focusing point
on the subject and press the
shutter button halfway.
• Focus is achieved and the shutter
speed and aperture settings are
displayed in the viewfinder and on
the LCD panel
• The E-TTL indicator on the rear
of the Speedlite 220EX lights
•The sync speed is set to 1/90
sec automatically and the aper¬
ture is set automatically at the
same time
*
SO H.sc
«]
Check that the ^ , shutter
speed, and aperture set¬
tings are displayed in the
viewfinder. Then, press the
shutter button completely
to take the picture.
The Speedlite 220EX fires a test
preflash immediately before the
shutter is released After obtaining
an initial flash exposure reading
with the preflash, the Speedlite
220EX fires the main flash to pro¬
vide optimum flash exposure
The test preflash is fired to obtain an initial flash exposure reading which is used to compute the output of the main
flash for optimum flash exposures.
The main flash is fired when the shutter is released to provide optimum flash exposure
13
Advertisement
Table of Contents
