Network - Motorola Avigilon H5A-FE Series User Manual

Fisheye camera web interface
Table of Contents

Advertisement

 
If you prefer to manually set the camera's date and time, enter the time zone on this page.
l
 
Select the Automatically adjust clock for Daylight Savings Time check box, if required.
l
 
If you prefer to auto-synchronize the camera's date and time with an NTP server, configure the
l
NTP server on the Network page.
At the bottom of the page, you can click on the (Configure NTP Server) link to go to the Network
page. For more information on configuring the NTP server, see
CAUTION — The time setting must always be current or the ACC software will reject the video stream
from the camera. To ensure that the time is always current you should do one of the following:
 
Set up NTP on the DHCP server used by the ACC software.
l
 
Use a valid public NTP server.
l
 
Manually set the correct time in the Time Settings fields.
l
 10. Click Apply to save your settings.

Network

On the Network page, you can change how the camera connects to the server network and choose how the
camera keeps time.
Note: You can only set the HTTPS port, the RTSP port, and the NTP Server in the camera web
interface.
 1. At the top of the page, select how the camera obtains an IP address:
 
Obtain an IP address automatically: select this option to connect to the network through an
l
automatically assigned IP address.
The IP address is obtained from a DHCP server. If it cannot obtain an address, the IP address
will default to addresses in the 169.254.x.x range.
 
Use the following IP address: select this option to manually assign a static IP address.
l
 
IP Address: Enter the IP Address you want to use.
o
 
Subnet Mask: Enter the Subnet Mask you want to use.
o
 
Default Gateway: Enter the Default Gateway you want to use.
o
 2. Select the Disable setting static IP address through ARP/Ping method check box to disable the
ARP/Ping method of setting an IP address.
 3. If the camera supports IPv6, select the Enable IPv6 check box to configure the following settings.
Note: Enabling IPv6 does not disable IPv4 settings.
Network
Network
below.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avigilon h5a series

Table of Contents