Craftsman INCREDI-PULL 316.791770 Operator's Manual page 8

WARNING:
To avoid serious personal injury and
damage to the unit, shut the unit off before removing or
installing blower tubes, nozzles, vacuum tubes or the
vacuum bag.
ASSEMBLING THE UNiT AS A BLOWER
_ WARNING: To prevent serious personal injury, never j
operate the unit without the blower tube firmly installed.
Always install the blower tube. The nozzle is optional.
Installing the Blower Tube
1. Align the bumps on the upper end of the blower tube with the
slots on the blower outlet (Fig. 1).
2. Insert the blower tube into the blower outlet (Fig. 1).
3. While holding the handle, twist the blower tube clockwise until it
locks into place (Fig. 1).
Installing the Nozzle
1. Align the slots on the nozzle with the bumps on the lower end of
the blower tube (Fig. 2).
2. Install the nozzle onto the blower tube (Fig. 2).
3. While holding the blower tube, twist the nozzle clockwise until it
locks into place (Fig. 2). The tabs on the blower tube should
align with the tabs on the nozzle (Fig. 3).
Bumps
Bum
Slot
SEots
Fig. 1
Blower
Outlet
Handle
Blower Tube
Blower Tube
Nozzle
Fig. 2
Tabs
Tabs
Fig. 3