Logitech BRIO 501 Setup Manual page 5

STEP 1: WHAT'S IN THE BOX
1 Webcam with attached
USB-C cable
2 Mount clip with removable
mount adaptor
3 User documentation
4 Streamlabs Coupon
STEP 2: DETERMINE MOUNT PLACEMENT
Placement to allow one-handed camera
adjustments (using micro-suction pad)
1 Determine the best placement for your
webcam before continuing
2 Wipe the back of your monitor to clear
any dust or dirt
3 Remove the protective film from the
micro-suction pad
4 Open the mount fully and place
on top of your monitor, being sure
that the pad of the front clip makes
contact with the front of the monitor
5 Rotate the rear foot down until it
makes contact with the back of the
monitor
6 Press the micro-suction pad to the
back of your monitor firmly to create
a good bond
Note:
– The mount adaptor can be removed and reused
for mounting adjustments without leaving residue
– To clean the micro-suction pad, rinse with water
to remove debris, and let it air dry in order to
regain strong suction
USB-C
%
4 English