Download Print this page

Kenwood KT-5020 Instruction Manual page 7

Am/fm stereo tuner
Hide thumbs Also See for KT-5020:

Advertisement

@ FM outdoor antenna
Consult with your dealer or service man about the best
method of selecting and erecting an outdoor FM antenna..
The choice of iead-in (feeder) wire is also important. The
flat ribbon-shaped twin lead performs well electrically, is
cheaper
and
is somewhat
easier to handle
in routing
through
windows
and around
rooms.
Coaxial
cable
is
more expensive, does a much
better job of minimizing
interference, is less prone to the effects of weather and
close-by metal objects, and is nearly as good a signal
conductor as the ribbon type wire. The latter is particularly
true of foam-type coaxial cables. Coaxial cable is some-
what more difficult to install at the point where the cable
enters the building.
M Connection
of coaxial cable
Bi FM outdoor antenna setting
® To minimize auto-ignition noise, locate the antenna as
far from heavy traffic as possible.
® Keep the feeder or coaxial cable as short as possible.
Do not bundle or roll up excess cable.
® The antenna should be placed at least two meters (6.6
feet} from reinforced concrete wal!s or metal structures.
@ T-shaped FM indoor antenna
The T-shaped FM antenna shall be used as a preliminary
for the period before a dedicated FM outdoor antenna is
installed.
Supplied
FM indcor
antenna
Arrange
the coaxial
cable as illus-
trated.
Outer shield
Inner
(Braid)
conductor
Remove
the
band
and
insert
the
inner conductor to the slit.
3, To
1
1. To
tighten
toosen
screw
|
screw
7
~.
2. Insert antenna
cable
Antenna
adapter
Open
the
75
ohm/300
chm
an-
tenna adaptor.
Press the claws in the direction of
the arrows
with the fingers to re-
lease the lock and pull out the cover.
Faster the band with screws, using 4
screwdriver.
@ Connection
of 300-ohm
feeder cable
Rear panei of unit
Plug securely into FM
ANTENNA jack.
Detach
the ring from the antenna
adaptor.
Then put the ring on the pole in the
(Antenna adaptor)
Close the cover.
Connect the adaptor to the antenna
terminal.
Set to
1. Find the
receiving
position that
mode.
provides best
reception.
2, Fix two ends.
KT-6026 (En}
7

Advertisement

loading

This manual is also suitable for:

Kt-5020l