Kenwood KT-5020 Instruction Manual page 2

introduction
Your choice of this product indicates that you are a
devotee of excellence in sound reproduction.
We appreciate your patronage and take pride in the long
tradriion of quality components that our company repre-
sents. ; : ;
So that you can get the most out of your unit, we suggest
that you take the time to read through this manual before
you hook up and operate your system. This will acquaint
you with the operating features and system-connection
considerations, so that your listening pleasure will be
enhanced right from the start. You will notice that in all
aspects of planning, engineering, styling, operating con-
venience and adaptability. we have sought to anticipate
your needs and desires.
Keep this manual handy for future reference.
For your records
Record the seria! number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model_____sdSerrial Number.
Unpacking
Unpack the unit carefully and make sure that all accesso-
ries are put aside so they will not be lost.
Examine the unit for any possibility of shigping damage. If
your unit is damaged ar fails to operate. notify your dealer
immediately. If your unit was shipped to you directly,
notify the shipping company without delay. Only the
consignee (the person or company receiving the unit} can
file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and
packing materials for use should you transport or ship the
unit in the future.
Contents
Introduction
ZN Before applying power
ZN Safety precautions
ZX IMPORTANT SAFEGUARDS
SVSLEM SONNE SIONS s s s s er ceri pretcesseinsenatereaitarsecsannted:
2 KT-8020 (En)
Note to CATV system installer:
This reminder is provided to call to the CATV system
installer's attention to Article 820-22 of the NEC that
provides guidelines for proper grounding and, in particu-
lar, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point
of cable entry as practical.
Accessories
FM indoor antenna
75 ohm/300 ohm
antenna adaptor
System control cord
(Except for some
Caution: Read the following pages marked in A\ carefully to keep your safety.
Controls and Indicators
Operating instructions
In case of difficulty
Specifications