Table of Contents
Advertisement
Available languages
Available languages
•
Do not place objects on top of the device. This may lead to
overheating of the device.
•
The device must be placed in a well-ventilated environment for use.
•
Do not expose the device to direct sunlight or store it in hot areas.
High temperature can shorten the life of electronic devices.
•
Do not allow children to play with the device or power adapter.
•
The device is for indoor use only. Do not use the device outside.
•
For pluggable equipment, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
Cleaning and Maintaining
•
Use an antistatic cloth to clean the device. Do not use chemical or
abrasive cleanser as these could damage the plastic case. Turn off
your device before you clean it.
•
Use the device within the temperature range of -20°C ~ +55°C,
and the storage temperature range is -40°C ~ +70°C. The humidity
range is 5%~95%.
•
Do not use your device during a thunderstorm. Remove the mains
power pack from the wall socket.
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MC888A Ultra and is the answer not in the manual?
Questions and answers
Hi, i recently got the ZTE MC888 Ultra 5G router and all my devices connects to the wifi and internet but theres something wrong and i cant figure it out. I cant visit some links on google it is as if theres no internet. Also on my Xbox Series S i can connect to the WIFI but it doesnt allow me to play online, it says NAT: Strict and UPnP unsuccessfull even though i have activated UPnP in the router settings.
To fix internet connectivity issues and NAT type problems on the ZTE MC888A Ultra 5G router, try the following steps:
1. Check Signal Strength: Ensure your device has a strong signal. Poor signal strength can cause slow speeds and connectivity issues.
2. Restart the Router: Power off the router, wait a few minutes, and turn it back on.
3. Verify Network Type: Make sure your router is connected to the correct network type (4G/5G).
4. Check IP Address Settings: Ensure your client device is obtaining an IP address automatically in the Internet Protocol (TCP/IP) settings.
5. Disable Proxy Servers: Avoid using any proxy servers in your network settings.
6. Correct Wi-Fi Settings:
- Ensure Wi-Fi is enabled on the router.
- Refresh the network list and connect to the correct SSID.
- Enter the correct Wi-Fi password from the device label.
7. Fix NAT Type Issues:
- Log into the router’s web interface using its default IP address (found on the device label).
- Enable UPnP (Universal Plug and Play) in the router settings.
- If needed, manually configure port forwarding for specific applications.
8. Factory Reset: If issues persist, reset the router to factory settings and reconfigure it.
If the problem continues, contact ZTE support.
This answer is automatically generated