Table of Contents
Advertisement
Fuel System
Maintenance
WARNING
Fuel-system components are under high
pressure. The use of improper components
can result in system failure, fuel leakage, and
possible explosion.
Use only approved fuel lines and fuel filters.
Draining the Fuel Tank
1.
Shut off the engine and wait for it to cool down.
Engage the parking brake.
Note:
Drain gasoline from a cold engine only.
2.
Disconnect the wire from the spark plug.
3.
Close the fuel shutoff valve.
4.
Disconnect the fuel line by loosening the tube
clamp at the carburetor.
5.
Open the fuel valve by turning the lever to the
open position.
6.
Drain the gasoline completely from the tank and
fuel line into an approved fuel container.
7.
Close the fuel valve.
Drive System
Maintenance
Note:
The hydrostatic transmission is factory-filled
and sealed. It does not require maintenance. For
service, contact your Authorized Service Dealer.
Checking the Tire Pressure
Service Interval: Before each use or daily
Maintain the air pressure in the tires as specified. To
get the most accurate reading, check the tires when
they are cold.
Pressure: 165 kPa (24 psi)
1. Valve stem
23
Figure 22
g003793
Advertisement
Table of Contents
