Table of Contents
Advertisement
Cleaning the drain pump
If water remains in the wash cabinet
after the end of the programme, the wa-
ter has not been pumped away. The
drain pump may be blocked by foreign
objects. These foreign objects are easy
to remove.
Disconnect the dishwasher from the
mains.
To do this, turn off the dishwasher,
switch off at the socket and unplug it.
Take the filter combination out of the
wash cabinet (see "Cleaning and care
– Cleaning the filters").
Scoop the water out of the wash cab-
inet using a small container.
Cleaning and care
1
Press the catch of the drain pump
cover inwards .
Tip the cover inwards until it is re-
leased .
Rinse the cover thoroughly under run-
ning water and remove all foreign ob-
jects.
2
85
Advertisement
Table of Contents
