Water connection
You can set your water connection type
and control the heat accumulator func-
tions.
If you select
Automatic
washer detects which water connec-
tion is currently being used and auto-
matically selects the right setting.
Select
Cold water
water connection and want to always
use the heat accumulator
Select
Warm water
water connection and do not want to
use the heat accumulator
, the dish-
, if you have a cold
, if you have a hot
Information
You can display the following informa-
tion about your dishwasher:
- Operating hours (see also "Options –
Displaying the operating hours")
- Programme sequences
- Total consumption
- Fault memory
- Data plate
- Software version
Showroom
For demonstration purposes only.
The dishwasher is equipped with a
demo mode for showroom use.
Factory default
You can reset all dishwasher settings to
the factory default settings.
Select
Reset
and confirm with OK.
Settings
37