Table of Contents
Advertisement
en
Damage due to unsuitable clean-
ing agents.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discol-
our the external surfaces.
Do not use abrasive cleaning agents,
glass cleaning agents, all-purpose
cleaners or oil-based conditioning
agents.
Storage/Factory default set-
tings
Storage
Switch the robot vacuum cleaner off
if it is not going to be used for an ex-
tended period of time. To switch it
off, press the I/0 switch on the side
of the robot vacuum cleaner to the 0
position.
If the robot vacuum cleaner is not going
to be used for an extended period of
time, make sure it is stored in a well
ventilated, cool place, but not at an am-
bient temperature below 0 °C.
For optimum care, store the robot va-
cuum cleaner at half charge capacity
(rechargeable battery status indicator
in the control field is orange).
74
Standard settings
The robot vacuum cleaner can be reset
to its factory default settings. Have the
remote control to hand.
Press and hold the Spot and
Turbo sensors in the control field at
the same time for at least 5 seconds.
r:St will appear in the display.
Within the next 2 seconds, press the
OK button on the remote control until
F:tr appears in the display.
The robot vacuum cleaner will start
again with its factory default settings re-
stored.
Advertisement
Chapters
Table of Contents
