Supervisor level
RemoteUpdate
The RemoteUpdate function updates
the software in your washing machine.
Factory default: on
If you do not install a RemoteUpdate,
you can continue to use your washing
machine in the usual way. However,
Miele recommends installing Remote-
Updates.
Activation
The RemoteUpdate menu option is
only displayed and can only be se-
lected if you have added your washing
machine to your WiFi network.
Some software updates can only be
carried out by Miele Customer Service.
98
Running a RemoteUpdate
If a RemoteUpdate is available for your
washing machine, it will be displayed
automatically when the Supervisor level
is open.
You can choose to start the RemoteUp-
date immediately or wait until later. If
you select "Start later", the prompt to
run the RemoteUpdate will be displayed
again the next time you switch on your
washing machine.
The RemoteUpdate can take a few
minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
a RemoteUpdate is available.
- Once a RemoteUpdate has been in-
stalled, it cannot be undone.
- Do not switch off the washing ma-
chine during a RemoteUpdate. Other-
wise, the RemoteUpdate will be
aborted and will not be installed.