Installation (Istl); Input/Output (I/O) - ABB D1M 15 User Manual

30 D1M 15 MULTIMETER USER MANUAL

7.2.Installation (ISTL)

ISTL includes the following sub-menus:
Menu
CT Primary
CT Secondary
VT Primary
VT Secondary
Wiring TYPE
The three items above must be set during the first startup. For details, see
ratio (Ct P, Ct S)"

7.3.Input/output (I/O)

In this section it is possible to configure I/O slots of the meter. D1M 15 series Multimeter meter have two
ports of DO.
I/O includes the following sub-menus:
Menu
DO
Digital Output (DO)
Each DO can be configured as Alarm output, Communication output, Pulse output, Output ON or Output
OFF.
CFG>I/O>DO
Description
Set the primary ratio of current transformers for current measurement
Set the secondary ratio of current transformers for current measurement
Set the primary ratio of voltage transformers for voltage measurement, if any
Set the secondary ratio of voltage transformers for voltage measurement, if any
Set the type of network and number of wires on which the device is installed
and "6.4.VT ratio (Vt P, Vt S)".
Description
Digital Output
"6.2.Wiring (WIR)", "6.3.CT