ABB D1M 15 User Manual page 17

D1M 15 MULTIMETER USER MANUAL
The following will be combined with the display to describe how to complete the data entry.
1. Press "Up" to increase the numerical characters from 0 to 9, until the required character is obtained.
• How to Go back to a previous number
If during the data entry the desired number is exceeded by mistake, it is needed to increase the displayed
number until data entry starts again from 0.
• Add a second digit
2. Press "Down" to move the cursor in order to add a second digit to the number.
• How to: Enable the comma
x4
x8
x1
x10
17