Sony DAV-DX150 Operating Instructions Manual page 68

6
T_D
I _ I _ U I_ t
Press 'I'/4, to select the preset number
you want.
7 Press ENTER.
The station is stored.
E ........
8 Repeat 1 to 7 to store other stations,
To change the preset number
Restart from Step l.
To change the AM tuning interval
(except for Saudi Arabian model)
The AM tuning interval can be set to either
10 kHz or 9 kHz.
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing Ii(_) on the system. While holding down
(on the system), press Ii(_) on the system to
tnrn on the power. If you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.
Listening to the radio
Preset radio stations in the system's memory
first (see "Presetting radio stations" (page 67)).
1
Press FUNCTION repeatedly until FM
or AM appears in the front panel
display.
The last received station is tnned in.
2
I T_JNED S_
Press PRESET + or - repeatedly to
select the preset station you want,
Each time you press the button, the system
tunes in one preset station.
Each time you press TL%TER, BAND, the
band changes between FM and AM.
Adjust the volume by pressing
VOLUME +/-.
To turn off the radio
Press I/_).
To listen to non-preset radio
stations
Use manual or antomatic tuning in Step 2.
For manual tuning, press TL%TING + or
repeatedly.
For automatic tuning, press and hold TUNING +
or . Press • when vou stop the automatic
tuning.
• If an FM proNam is noisy, press FM MODE so that
"MONO" appears in the front panel display. Thae
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
• To improve reception, reorient the supplied antennas
(aerials).
• You can check the frequency by pressing DISPLAY
repeatedly (page 50)
Naming preset stations
You can enter a name for preset stations. These
names (for example, "XYZ") appear in the
system's front panel display when a station is
selected.
Note that no more than one name can be entered
for each preset station.
1
Press FUNCTION repeatedly until FM
or AM appears in the front panel
display.
The last station yon received is tuned in.
2
Press PRESET + or- repeatedly to
select the preset station you want to
create an index name for.
3
4
Press TUNER MENU.
Press <-1"I'14,1-.> repeatedly until "NAME
IN" appears in the front panel display,
I L,SED ,_ ]
I' I I--I _' '_ F I I_ t
68G8