Table of Contents
Advertisement
15
Keep the Thumb Turn in the vertical position,
toggle the Installation Buckle upwards, and
install the Interior Assembly.
17
Install the AA alkaline batteries according
to the direction guide inside the battery
holder.
Attention
Ensure the cable is not pinched or the lock will not function properly.
Need help?
U.S.A. & Canada: +1(833)599-9111
16
Attach the Interior Assembly to the Mounting
Plate, toggle the Installation Buckle downwards,
and fasten using the Interior Assembly Screws.
18
Remove one of the batteries, press and
hold the Reset Button, and then insert the
removed battery while pressing. When
you hear the voice prompt, the factory
reset is complete.
This activates the lock-handing process and
must be completed before setting up the lock.
Interior Assembly
Screws
Note:
Do not use
other screws.
11
Advertisement
Table of Contents
