Philips Home Access 4000 Series User Manual page 10

1" Drill Bit for Wood
At Least 13/64"
(5 mm) Deep
7
Install the Latch Bolt.
1
Chiseled
1
Not chiseled
8
Install the Latch Bolt and rotate it with a
screwdriver to con�rm smooth rotation.
8
NO
For a 1-1/2" (38 mm) bore hole, use a 1" (25 mm) Drill Bit to extend the latch hole
at least 13/64" (5 mm) deep.
No need to extend the latch hole for a 2-1/8" (54 mm) bore hole.
After extending the latch hole, insert the Latch Bolt again to ensure it �ts correctly.
2
Cam
1"
25 mm
2
Latch Bolt Screws
3
Drive-In
Collar
If it cannot rotate smoothly because the door
hole is too small.
Remove the Latch Bolt and chisel out a small
channel at the top of the hole to give the cam
of the Latch Bolt room to rotate.
4
Chisel