Toro 23521 Operator's Manual page 2

Brush cutter walk behind
Table of Contents

Advertisement

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Because in some areas there are local, state, or
federal regulations requiring that a spark arrester be
used on the engine of this machine, a spark arrester is
available as an option. If you require a spark arrester,
contact your Authorized Toro Service Dealer.
Genuine Toro spark arresters are approved by the
USDA Forestry Service.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm. Wash
hands after handling.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is intended to be used by professional,
hired operators in commercial applications. This
machine is designed to level brush, tall weeds,
saplings, and small trees and heavy vegetation up to
1.8 m (6 feet) tall and 5.1 cm (2 inches) in diameter.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
You may contact Toro directly at
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. identifies
the location of the model and serial numbers on the
product. Write the numbers in the space provided.
Important:
With your mobile device, you can
scan the QR code (if equipped) on the serial
number decal to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
www.Toro.com
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g464864
g000502

Advertisement

Table of Contents
loading

This manual is also suitable for:

33521

Table of Contents