Table of Contents
Advertisement
3) Select Configuration - System Set from the menu bar
Click Configuration on the initial screen menu bar, and select System Set.
The password confirmation screen opens.
4) Enter the password
Enter password at the password confirmation screen, and click the OK but-
ton.
Note:
- The password is "TG2000ASYSTEMV04". Manage the password carefully.
The options setting screen opens.
6.3 Options Selection Setting
The following describes how to set this function
[Procedure]
1) Select the functions option button
Select the following function settings with the Option button:
- Change (Energy monitoring) function
- General PLC functions
- Energy saving function
- Peak cut function
- Trend function
- Night mode function
- Auto-changeover function
- IC I/O signal function
6.4 Ending This Function
Ending options setting
The following describes how to end this function.
[Procedure]
1) Click the OK button
At the end of options setting, click the OK button. The display returns to the
initial screen.
OK
: Reflects the set contents and returns to the initial screen.
Cancel
: Returns to the initial screen without reflecting the changes.
17
Password entry screen
Function options setting screen
Advertisement
Table of Contents
