BILL ACCEPTOR CLEANING
CLEANING
if the moving parts become dirty, get wet, or are stuck
with foreign particles, proper operation cannot be main-
tained.Clean according to the requirements of the situa-
tion,
(The figure shows mode! NB-2BA.}
Wipe the bill insertion opening
Clean the photo sensor and
Wipe clean the chute roller,
with a soft cloth.
magnetic heads with a
and belt with a soft cloth.
cotton pad.
Bock Side View
Photo sensor
Magnetic head
Rubber roller
INSPECTION
{The figure shows model NB-2BA.)
Prevention {of hanging) lever
Protection (from pull-out) tever
It shouid pull out easily and when released,
It should push easily, and when released,
return smoothly without sticking.
return smoothly without sticking.
77