Advertisement
NAMES AND FUNCTION OF EACH PART
[REMOTE CONTROL UNIT]
@ PIONcER
(- ee
®
«
CANCALerancay
|
©
)
@ VOLUME keys
++: Increases the volume level.
-: Decreases the volume level.
@MUTE key
To temporarily decrease the sound volume level. Press the
key again to rasume normal sound volume level.
NOTE:
* When activating the MUTE function with the ramote control
unit, VOLUME {up, down} cannot be used.
After the MUTE function is released, the VOLUME keys can be
operated,
The light-receiving indicator on the CD jukebox lights during
the MUTE mode.
@ CANCEL/STANDBY keys
When the two keys are pressed simultaneously, the song
stops and the system returns to the STANDBY mode. The
SELECTION PLAYING indicator displays "PLAYING STAN-
DBY." Pressing the keys again will cancel the STANDBY
mode and the system starts selecting songs.
14
How to load batteries
t. Open the rear cover.
2. Instail "AAA" type batteries (IEC RO3/UM-4}), correctly
matching polarity.
3. Close the cover.
Incorrect use of batteries may lead to leakage or rup-
ture.
Always be sure to follow these guidelines:
A:
Always insert batteries into the battery compartment, cor-
rectly matching the positive © and negative © polarities,
as indicated inside the compartment.
B:
Never mix new and used batteries.
Cc:
Batteries of the same size may have different voltages, de-
pending on their type, Do not mix different types of batte-
ries.
Range of remote control
Distance: Within 4 range of approx.
7 meters (23 feet)
from the remote sensor window on the CD jukebox.
Angle: Within approx. 30 degrees from the center of the
remote sensor window on the CD jukebox,
Light-receiving indicator
7m
(23 ft}
Remote control will not be possible if there is an obstacle
between the remote contro! unit itself and the remote sen-
sor window on the CD jukebox,
Performance of the remote control unit is adversely af-
fected
in the presence
of strong fluorescent
light.
Keep such lights away, especially from the sensor win-
dow.
CAUTION:
The light-receiving indicator on the remote control unit does not
light when the remaining power of the battery is insufficient.
Replace the battery.
Advertisement
