LO Gets
i t e
MAINTENANCE
General
Cleaning
and Lubrication
Hardened dirt should be removed by using a mild detergent and water solution on a cotton-tipped swab
or a soft cloth. Avoid excessive use of water. Do not allow water to penetrate any parts. Avoid the use
of abrasives and chemical agents.
CAUTION:
After cleaning, the sets should be carefully inspected for defects such as poor connections,
damaged
parts and loosened mechanical parts.
nuts are replaced.
* Do not paint the
radome.
If any crack is found,
apply slight amount of
sealing compound or
adhesive as first-aid
treatment, then call for
repair.