Removing Upnp Tracks From The Диеџе; Playing Upnp Tracks In Random Огаег; Playing Upnp Tracks In The Queue Гереаїейїу; Aaa - Sanyo R227 Instruction Manual

Hide thumbs Also See for R227:
Table of Contents

Advertisement

Removing UPnP tracks from the queue
. Press the BROWSE
button. The currently playing track name will be displayed.
. Turn the knob to select the track you want to remove from the queue.
‚ Press and hold the STOP button for 2 seconds.
. Turn the knob to highlight 'Yes' or 'No".
. Press SELECT to confirm whether you actually want to delete the track from the queue.
. If 'Yes' was selected then 'Removed From Queue' will be displayed.
"Уо
Ф р ON
=
Playing UPnP tracks in random order
. Select the individual tracks as described previously.
. Navigate to top-level menu item 'Media Player' using the SELECT and BACK buttons.
Press the SELECT button.
. Turn the knob until 'Playback Mode' is displayed.
Press the SELECT button.
. Turn the knob until 'Shuffle' is display.
. Press the SELECT button.
. Turn the knob to select
YES/NO
to confirm that shuffle mode should be enabled.
Playing UPnP tracks in the queue repeatedly
со У с сф
о № ~
1. Selectthe individual tracks as described previously.
2. Navigate to top-level menu item 'Media Player' using the SELECT and BACK buttons.
3. Press the SELECT button.
4. Turn the knob until ' Playback Mode" is displayed.
5. Press the SELECT button.
6. Turn the knob until 'Repeat' is displayed.
7. Press the SELECT button.
8. Turn the knob to select
YES/NO
to confirm that repeat mode should be enabled.
Note:
1. If the shared folders contain more songs than the Internet Radio memory limit, it will display
"Too many files"
2. Repeatedly pressing button P4 will toggle the Repeat and Shuffle modes.
Setting the clock
|
1. Press the SELECT button. (Note: if you make a mistake at any point, press the BACK button
go back to the previous screen.)
2. Turn the knob until the display says <Configure>
Stations
Media Player
<
Configure
>
3. Press the SELECT button.
4. Turn the knob until the display says <Clock Setup>
Register
<
Clock Setup
>
Backlight
US-20

Advertisement

Table of Contents
loading

Table of Contents