WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.
IMPORTANT NOTICE User's Guide Contents: Install Autodesk DWF Viewer Internet Explorer Settings Operating Environment Functions Provided on Each Drawing Page Using with Network Install Autodesk DWF Viewer Autodesk DWF Viewer is necessary to view drawings and to activate the functions of this system. Please download and install.
Page 4
[My Computer (right-click)] - [Properties] 2. Internet Explorer setting [Tools] - [Internet Options]...
for Windows Vista Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended Mouse : A mouse with wheel recommended : Microsoft Windows 2000 SP4 / XP / Vista Browser Microsoft Internet Explorer 6.0 / 7.0 Drawing viewer : Autodesk DWF Viewer 6.0 / 7.0 * Use the software following respective license terms and conditions.
Page 7
Functions Provided on Each Drawing Page Parts Information Reference Function When the character string of a part on the drawing is clicked, its information is popped up at the location. You can get any parts information immediately on the screen without referring to the maintenance parts list. Parts Search Function You can search any part within the displayed drawing or within the whole schematic diagram/board view by specifying a location number.
Page 8
Using with Network PRECAUTION To use ZEUS Service Manual Ver.2 with network, the file-path names written on the source files of each ZEUS Engine Program Ver.2 and ZEUS Service Manual Ver.2 are to be modified. Perform the procedure described below. Preparation 1.
Page 9
Procedure of File-Path The zeusFPch is the exclusive program to exchange the file-path names written in both source files of ZEUS Manual and ZEUS Engine program into those applicable to the network use. 1. Whenever changing the file-path of both ZEUS Engine Program and ZEUS Service Manual to use with network, pay the attention to set the "Exchange to"...
Page 10
Run the zeusFPch and set "Exchange to" by referring to the examples below. Example 1 : In the "Exchange to" column shows the relation between ZEUS Service Manual and ZEUS Engine Program. ../ counts the relation between. Thus in this case, it must be ../../zeus/ (2 counts). Example 2 : In this case, it must be ../../../zeus/ (3 counts).
Page 11
2. Run the zeusFPch to change the path in the ZEUS Engine Program Ver.2. 3. Set ZEUS Engine Program in the created folder in the server to the "Target Folder", and then press "START". (This procedure is one time only)
Page 12
4. Run the ZeusFPch to change the path in the ZEUS Service Manual Ver2. 5. Set unzipped ZEUS Service Manual in the created folder in the server to the "Target Folder", and then press "START". (This procedure is required whenever placing service manual.)
Page 13
Confirmation Confirm that service manual on the server can be operated normally by client PC. Note: In case of accessing the ZEUS Manual through WEB site, the small pop-up window appears at the left bottom corner on the screen whenever searching the location links. This is not malfunction.
Page 14
Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
Page 15
The real cause has not been found yet but with this condition, nothing disturbs the service manual operation. Continue to use by operating the windows. Precaution when opening the diagrams While opening the diagrams, the menu in the left frame changes its color to GRAY. This is an indication that the viewer is processing.
Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.
LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.
SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Page 19
6. Always use the replacement parts specified for the particular model when making repairs. The parts used in products require special safety characteristics such as inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list.
Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. or peak reading) Input resistance : Input capacitance : 200 pF Frequency range : 15 Hz to 1 MHz and d.c. respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms.
- for d.c. : = 1.0 V Note: The limit values of = 0.35 V (peak) for a.c. and = 1.0 V for d.c. correspond to the values 0.7 mA (peak) a.c. and 2.0 mA d.c. Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics.
SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 23
because any impact can adversely affect the performance. Also use caution when handling the polarized screen because it can easily be damaged. 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again.
Page 24
6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
Page 25
9. Do not disassemble the LCD module. Such actions could result in improper operation. 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity.
Page 26
U06A U05A MAIN (DIGITAL) POWER U03A AC SW U04A LED U04B RMT...
Page 27
MAIN BOARD REMOTE RECEIVER OPTICAL SENSOR DDRII RAM*2 PANEL FLI32626 Sequoia ATV(V) VBI Data Processor TCON CVBS PANEL I/F R/G/B/FB EXT1 Video (SCART) Analog TVOUT V 75ohm Front Decoder Driver TVOUT L/R CVBS/RGBFB/SY/SC/(Y/Cb/Cr) or (RGBHV) (16port) DCDi LVDS MADi CVBS/S(Y/C) Scaling 75ohm EXT2...
SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 29
Unless otherwise noted in schematic, all capacitor values less than 1 are expressed in µF, and the values more than 1 in pF. All capacitors are ceramic 50 V, unless otherwise noted as the following marks. = Electrolytic capacitor = Mylar capacitor 3.
ADJUSTMENT Service Mode Entering to Service Mode 1. Set VOLUME to minimum and press button once on remote control. ↓ 2. Press button again and hold button down. ↓ Service Mode display 3. While holding the button, press MENU button on TV set. Displaying the Adjustment Menu Press MENU button on TV.
Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. CAUTION: Never try to perform initialization unless you have changed the memory IC. button (on remote control) Test signal selection Selection of the adjustment items (on TV or remote control) Volume +/- (on TV or remote control)
Page 140
Item Name of adjustment RCUT R CUT OFF GCUT G CUT OFF BCUT B CUT OFF RDRV R DRIVE GDRV G DRIVE BDRV B DRIVE BRTC BRIGHTNESS CENTER COLC COLOR CENTER UVTT BASE BAND TINT CNTX CONTRAST MAX VOLUX MAX VOLUME LIMITED PLLW0 PLL WAIT TIME PLLW1 PLL WAIT TIME PLLW2 PLL WAIT TIME...
Page 141
- to set OPT4 or OPT5 value as table below. Panel option data Series Model name Panel vendor OPT4 value OPT5 value XV555D EU Digital 32XV555D/553D/556D SAMSUNG 0x86 0x45 37XV555D/553D/556D 0x81 0x66 42XV555D/553D/556D 0x81 0x67 46XV555D SAMSUNG 0x86 0x4A 52XV555D...
Ex. OPT5 value 0x45 indicates that panel size is 32. OPT5 (bit7) (bit6) (bit5) (bit4) (bit3) (bit2) (bit1) (bit0) Size Backlight Positive Status Logic Negative Backlight Execute Status Check Unexecuted Convert from Bit (Binary) to Hex The table for converting from bit (D7-D0) to hex (0x**). BIT (Binary) High nibble Low nibble...
Page 143
9) Check the picture carefully. If necessary, adjust any adjustment item above. Perform "Auto tune" on the owner's manual. MODEL ID (HEX) Model name Panel vendor 0x01 32XV555D/553D/556D SAMSUNG 0x02 37XV555D/553D/556D LGD 0x03 42XV555D/553D/556D LGD 0x04 46XV555D SAMSUNG 0x05 52XV555D...
Page 144
0x17 0x18 0x19 0x20 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x30 0x31 0x32 0x33 Initializing Data setting flowchart after replacing the Signal Unit...
Page 145
Test Signal Selection Every pressing of button on the remote control changes the built-in test patterns on screen as described below in Service Mode. Picture Signal Red raster Green raster Blue raster...
All Black All White Self Diagnostic Function 1. Press "9" button on remote control during display of adjustment menu in the service mode. The diagnosis will begin to check if interface among IC's is executed properly. 2. During diagnosis, the following displays are shown. * Self check display and Item are subject to the models.
Page 147
(SCART (FULL)) (SCART (S+AV)) (Component) (Composite) HDMI1 HDMI2 DTV DTV (Digital Only) Version Check Mode 1. Press "9" button twice on remote control during display of adjustment menu in the service mode. The version of main MPU will be checked. 2.
Page 148
(5) HDMI ID : HDMI ID information : Display 4 byte data. (6) SW Ver Version information of DB software as Toshiba release. (Only digital model.) (7) MW Ver Left side is Application and UI version information of DB software. (Only digital model.)
Page 149
(1) MAIN : Main source information : Display RF position number (0 - 99) on the main screen, or Input Source (EXT1/2/3/HDMI etc.) (2) MAIN FORMAT : Display Video and PC format information (3) MAIN PLL : Main PLL information : Display 1 byte data at five. (4) SUB : Sub source information : Display RF position number (0 - 99) on the Sub screen, or Input Source...
Page 150
1. By pressing P or P , OPT2 setting will change the value either 1 or 0 on selected items as follows; OPT2 FUNCTION DESCRIPTION (Normal) D7 (bit7) - (no use) D6 (bit6) Enable mode that TV On will be appeared in Enable Disable forced when turning the main power ON...
D0 (bit0) Value above 100 is no effect. OPT8 FUNCTION DESCRIPTION 0 (Normal) D7 (bit7) ~ - (no use) D3 (bit3) D2 (bit2) Enable mode that picture mode will be set in Enable Disable forced when turn ON the main power (Display the language only) D1 (bit1) ~...
Page 152
TECHNICAL BULLETIN File Name Title issuing date...
PANEL IDENTIFICATION Panel Identification If the several panels are alternatively used in the same model without amending the model name, the identification marking will be shown at the last digit of the set serial number on the specification label on the back cover. In servicing, do not alter the panel because several setting and parts are different.
PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 156
PARTS LIST ↓Select Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. :...
Page 183
PARTS LIST U04A LED (PE0534) Block : Block Location Parts No. Description U04A LED (PE0534) U04A 75011070 PC BOARD ASSY, PE0534A1, LED U04A LED (PE0534) CB06 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z U04A LED (PE0534) CB07 76619157 CAPACITOR, ELECTROLYTIC CHIP, 16V 100UF U04A LED (PE0534) DB01 75009054 DIODE, LED, SML-020MLT T86...
Page 202
PARTS LIST Miscellaneous Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Miscellaneous B001A 75011199 LCD PANEL, LC370WUN-SAB1 Miscellaneous H001 75010735 TUNER, ENG37E05KF Miscellaneous MZ01A 75011200 WIRE HARNESS, MF0160 Miscellaneous P801 23372353 POWER CORD, UK 250V3A FL/FUSE13...
Page 203
PARTS LIST Accessory Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Accessory Y101 75012898 MANUAL ENGLISH Accessory Y101E 75012900 MANUAL MANUAL EURO Accessory Y101N 75012901 MANUAL MANUAL NORDIC Accessory Y105 75010347 OWNERS MANUAL, STD EU...
Page 204
PARTS LIST Cabinet Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Cabinet A201 75011180 FRONT BEZEL ASSY Cabinet A342 75011097 BUTTON ASSY, POWER Cabinet A401 75011151 BACK COVER ASSY Cabinet A412 75010345 SCREW, BITTB3X8 SBN...
Page 205
PARTS LIST Packing Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Packing A701 75012845 CARTON CASE TPO, CASE TPO Packing A702A 75012746 PAD TOP PACKING, TOP PACKING Packing A702B 75012747 PAD BOTTOM PACKING, BOTTOM PACKING...
FUNCTION AND OPERATION Controls and Input Connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. Switching On Using the Remote Control Using the Controls and Connections...
FUNCTION AND OPERATION Tuning Digital Television Before switching on the television put your decoder and media recorder to Standby if they are connected. Tuning for the First Time...
Need help?
Do you have a question about the 37XV555D and is the answer not in the manual?
Questions and answers