Related Manuals for Envertech EVT800-B
Summary of Contents for Envertech EVT800-B
- Page 1 User Manual Envertech Corporation Ltd. Tel: +86 21 6858 0086 EVT800-B Web: www.envertec.com Email: info@envertec.com Add: No.138, Xinjunhuan road, Minhang District, Shanghai, China USM-B-2023-V01...
-
Page 2: Table Of Contents
System Diagram ........... 16 Read it First ............... 1 Recycling and Disposal.......... 16 Safety Instructions ............ 1 Contact ..............17 Envertech Microinverter System ......2 How it Works ............2 Monitoring Device: EnverBridge ....... 2 Optimal Reliability............. 2 Simple Design ............2 Product Information .......... -
Page 3: Important Safety Information
Please be kindly note that the Envertech microinverter itself is a heat sink. WARNING indicates a hazardous situation which, if not Under normal operating conditions, its temperature is 20°C above ambient, but avoided, can result in death or serious injury or moderate injury. -
Page 4: How It Works
You can view the real-time data from a web browser or Envertech app. This integrated solar system maximizes energy harvest, increases system reliability. Simplifies design, installation and management. 2.1 How it Works The Envertech microinverter maximizes energy production from your EnverBridge: monitoring and protecting PV system. -
Page 5: Simple Design
Also, the following protective functions are integrated into Envertech microinverters. Internal overvoltage/undervoltage protection PV systems using Envertech microinverters are very simple to design and install. You can install a combination of PV modules of any type, at any orientation and Faulty grounding protection Grid monitoring. -
Page 6: Packing Checklist
96.8% 4.1 Accessories MPPT Efficiency 99.9% After you receive the Envertech microinverter, please check if there is any Nighttime Power Consumption <100mW damage on the carton, and then check the inside completeness for any visible external damage on the microinverter and accessories. Contact your dealer if Features anything is damaged or missing. -
Page 7: Further Information
Danger of hot surface The components inside the inverter will release a log of heat during operation. DO NOT touch aluminum casing during Installing Envertech microinverter system involves several key steps. Each operating. step listed here is elaborated on the following pages. - Page 8 Model: EVT800 Temperature( ℃ ): -40 ℃ to +65 ℃ User Identification Number Envertech(Shanghai)Corporation LTD. www.envertec.com Step 3. Ground the system Microinverters and modules must be connected to the grounding conductor Connect the other side of the extension cable to the air switch.
- Page 9 800W Temperature( ℃ ): -40 ℃ to +65 ℃ User Identification Number Envertech(Shanghai)Corporation LTD. www.envertec.com a. Open Enverview app and click WiFi. Select “EVT” to connect. Step 7. Connect PV modules to microinverters Mount the PV modules on top of the microinverters; Connect each PV module with the DC input cables of the microinverter.
- Page 10 3. Please ensure that the current network your phone connect to is 2.4GHz WiFi, and the connection between your router and the Internet is in good condition. c. Connect the network whose name is as same as your EVT’s SN, and return to the app.
- Page 11 the WIFI. 7. The webpage will prompt “Rebooting Successful!”. Note: Don't forget the password, otherwise it cannot be reset! 4. Select the current wireless network, and press "OK". Note: If more than one microinverter needs to be connected to Wi-Fi, configure one microinverter first.
- Page 12 Option 2. Use the app “Enverview” to register Option 2. Use EnverPortal to bind MI a. Login www.envertecportal.com with the newly-registered account, go Fields marked with an asterisk (*) are required. to Settings--Management. b. Click Add, then enter the SN of EVT800, click OK to finfish binding. For Device S/N, you can find S/N labeling on EVT800 or outer packaging.
- Page 13 Note: Insert the USB flash drive into the USB socket on EVB300 as shown on ① Time Calibration button the following picture. Otherwise, the USB flash drive cannot be recognized. ② Microinverter SN selection ③ Quick query button ④ Start time and End time selection ⑤...
-
Page 14: Debugging And Operating
7.2 EVT800 Operation The Envertech microinverter is powered on when there is sufficient DC voltage from the PV module. The LED light of each microinverter will blink green to indicate normal start-up operation approximately 1 minute after DC power is applied. -
Page 15: Troubleshoot An Inoperable Microinverter
Envertech microinverter. or damaged, it needs replacement. WARNING: Envertech microinverters are powered by DC power from the PV 11. Verify with your utility company that grid frequency is within the regulated modules. Please disconnect and reconnect DC power to check the LED blinks 1 range. -
Page 16: System Diagram
7 Router 10. Recycling and Disposal socket WARNING: 4 RJ45 Cable Do not attempt to repair the Envertech microinverter. It contains no user-serviceable parts. If the microinverter fails, PV Module PV Module contact your direct supplier or Envertech customer service to... -
Page 17: Contact
11. Contact Envertech Corporation Ltd. Tel: +86 21 6858 0086 Web: www.envertec.com Email: info@envertec.com Add: No.138, Xinjunhuan road, Minhang District, Shanghai, China...
Need help?
Do you have a question about the EVT800-B and is the answer not in the manual?
Questions and answers