Advanced Setting - SolaX Power X3-ULTRA Series User Manual

»
Mode Priority: Minimun/Maximum duration > Schedule >Thresholds on/off
Setting User Password
The default password is "0 0 0 0". You can reset the password here.
9.8.2

Advanced Setting

Setting path: Menu>Setting>Advance Setting
Property losses or system damage due to unauthorized access to adjustable
parameters.
• All the adjustable parameters including safety code, grid parameter, export control,
etc can be modified under the permissions of installer password. Unauthorized use
of the installer password by unauthorized persons can lead to incorrect parameters
being input, resulting in property losses and system damage. Get the installer
password from the dealer and never open the password to unauthorzied person.
Setting Safety Code
In order for the inverter to be able to fed in, the safety code must be set to the installation
site correctly. Here you can set safety code according to different countries and grid-tied
standards.
• The inverter cannot be connected to the grid before the safety code is correctly set. If
there is any doubt about your safety code where the inverter installed, please consult
your dealer or SolaX service for details.
• Different safety code may have different configuration options.
• When you select safety code CEI 0-21, there will be additional Self Test option for
setting under the path of Menu>Setting>Advance Setting.
• When you selelct safey code AS4777, there will be additional AS4777
Setting option for General Control and Export Control under the path of
Menu>Setting>Advance Setting.
===Load Management===
Work Period 1
Start Time
00:00
===Load Management===
Work Period 2
Start Time
00:00
===Load Management===
Work Period 1
End Time
00:00
===Load Management===
Work Period 2
End Time
00:00
NOTICE!
NOTICE!
Operation on LCD
97