Field Setting; Zone Installation Setting - Hitachi airCore 700 Installation & Maintenance Manual

INSTALLATION & MAINTENANCE MANUAL

7. Field Setting

DO NOT Perform Test Run during system starting or before following settings are completed.

7.1 Zone Installation Setting

7.1.1 Zone Configuration Setting
If the wired controller is connected to the zone interface box, the "Zone Installation Menu" is
displayed in the "Service & Installation Menu" of Wired Remote Controller.
Service & Installation
Service Menu
Installation Menu
Check Menu
Zone Installation Menu
OK Select
(Mon) 16:30
Back
The total airflow ratio of common zone and spill zone(s) shall not be less
than the Minimum Airflow Ratio.
22
Zone Installation Menu
Common Zone Setup
Zone ActiVation
Zone Labeling
Nominate Spill Zone(s)
Sensor Assignment
OK Select
(Mon) 16:30
Back