Troubleshooting - Craftsman CMXGLXT2700 Instruction Manual

TROUBLESHOOTING

Problem
Engine will not start
Engine shuts off during
operation
Wedge movement is slow or
erratic
Wedge will not extend or
retract
Wedge does not auto-return
Excessive bouncing while towing
FREE WARNING LABEL REPLACEMENT: If warning labels become illegible or are missing, call 1-888-331-4569 for a free replacement.
For further technical support please contact:
YTL International Inc.
17517 Fabrica Way Suite H
Cerritos, CA 90703
Phone: (888) 331-4569
Website: www.CRAFTSMAN.com
Log Splitter Parts and Service:
Toll Free 1-888-331-4569
9
Cause
Engine switch in "OFF" position
Fuel shut-off valve in "OFF" position
No fuel
Faulty spark plug
Spark plug is disconnected
Unit is loaded during start up
Out of fuel
Low oil level
Air in the hydraulic oil system
Debris lodged in beam guides
Low hydraulic oil
Faulty control valve
Faulty hydraulic pump
Low hydraulic oil
Low hydraulic oil
Faulty control valve
Under-inflated tires
Over-inflated tires
Solution
Move switch to "ON" position
Move valve to "ON" position
Add fuel
Replace the spark plug
Connect the spark plug
Move valve handle back and forth,
remove load
Fill the fuel tank
Fill the crankcase to the proper oil level
Purge air by extending and retracting the
wedge several time until motion is smooth
Clear debris from beam
Check oil level and add as needed
Contact customer service
Contact customer service
Check oil level and add as needed
Check oil level and add as needed
Contact customer service
Inflate tires to proper pressure level
Inflate tires to proper pressure level