DeWalt DCD708 Original Instructions Manual page 18

EnGLIsH
Batteries
Cat # V Ah
DC
DCB546 18/54 6.0/2.0
DCB547 18/54 9.0/3.0
DCB548 18/54 12.0/4.0
DCB181 18 1.5
DCB182 18 4.0
DCB183/B/G 18 2.0
DCB184/B/G 18 5.0
DCB185 18 1.3
DCB187 18 3.0
DCB189 18 4.0
DCBP034 18 1.7
*Date code 201811475B or later
**Date code 201536 or later
***Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
D WALT UK, 270 Bath Road, Slough
e
SL1 4DX
England
06.12.2021
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
18
Weight (kg) DCB104 DCB107 DCB112 DCB113 DCB115
1.08 60 270
1.46 75* 420
1.46 120 540
0.35 22 70
0.61 60/40** 185
0.40 30 90
0.62 75/50** 240
0.35 22 60
0.54 45 140
0.54 60 185
0.32 27 82
WALT at the following
e
WALT.
e
Chargers/Charge Times (Minutes)***
DCB116
170 140 90
270 220 135* 110*
350 300 180 150
45 35 22
120 100 60 60/45** 60/40** 60/40**
60 50 30
150 120 75 75/60** 75/50** 75/50**
40 30 22
90 70 45
120 100 60
50 40 27
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your
mains‑operated (corded) power tool or battery‑operated (cordless)
power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b ) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e ) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
3) Personal Safety
a ) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power tool
DCB117 DCB118 DCB132 DCB119
80 40 60
60 75*
80 120
22 22 22
30 30 30
22 22 22
45 45 45
60 60 60
27 27 27
90 X
135* X
180 X
22 45
60 120
30 60
75 150
22 40
45 90
60 120
27 50