DeWalt DCD708 Original Instructions Manual page 17

CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD708, DCD709
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No‑load speed
1st gear
2nd gear
Beats per minute
1st gear
2nd gear
Max. Torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
Screwdriving
Vibration emission value
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is
used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
WALT one of the
e
DCD708
V 18
DC
2
Li‑Ion
min‑1 0–450
min‑1 0–1650
–
–
Nm 65/26
mm 1.5–13
mm 30
mm 13
mm –
kg 1.10
dB(A) 72
dB(A) 83
dB(A) 5
= m/s 2 <2.5
m/s 2 1.5
= m/s 2 –
m/s 2 –
m/s 2 <2.5
m/s 2 1.5
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
DCD709
accessories, keep the hands warm, organisation of work patterns.
18
2
Li‑Ion
0–450
0–1650
0–7650
D WALT declares that these products described under
e
0–28050
Technical Data are in compliance with:
2006/42/EC, EN62841‑1‑2015+AC:2015, EN62841‑2‑
65/26
1:2018+A11:2019.
1.5–13
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
30
the following address or refer to the back of the manual.
13
The undersigned is responsible for compilation of the technical
13
file and makes this declaration on behalf of D
1.20
86
Markus Rompel
97
Vice President of Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
3
65510, Idstein, Germany
06.12.2021
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS
3.3
1.5
14.5
1.5
<2.5
D WALT declares that these products described under
e
1.5
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1‑2015+AC:2015, EN62841‑2‑1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
EC‑Declaration of Conformity
Machinery Directive
Drill/Driver/Impact Drill
DCD708, DCD709
DECLARATION OF CONFORMITY
2008
Drill/Driver/Hammerdrill
DCD708, DCD709
EnGLIsH
WALT at
e
WALT.
e
17