Table of Contents
Advertisement
CHANNEL
EDIT Menu: Channel,
Memory, Name Selection
Figure22.
Cbannd
Channel
(Figure 22)
Select to edit the channel selections.
You can add or
delete from memory, name, or add to the SQ_V (Super
Qgick View
TM)
list.
After selecting Channel,
editing can be done using the
Adjust buttons or entering the 3 digit channel number
you want to change (Example 002 for channel 2).
Figure 23. Memory
Memory
(Figure 23)
Add weaker channels viewed with ANT and delete
unwanted
channels,
after all available channels have
been memorized
with Memorize
Channels
(page 35).
Use the CH (channel) button on the remote control to
view memorized
channels.
Name
(Figure 24)
Name
channels
shown
on ANT
(up to four
characters).
After you enter a name,
it will appear
on
the TV screen
next to the channel
number.
1. Select the memorized channel you want to name.
2. Press ADJUST until you see the
underline highlighted in the Name field.
3. Use ADJUST • or • to select letters A-Z,
numbers 0-9, and!or symbols (!.&'!:*- and blank)
for each character of the name you would like for
the selected channel.
Press ENT after choosing
each letter and after the name is complete. If you
want to change your selection while on the option
field, use CANCEL
to delete the current character.
You will move one position back. If you press
CANCEL while at the first character, the entire
name will be deleted.
Figure24.
Name
41
Advertisement
Table of Contents
